Selective Call Acceptance Instructions

You can program your phone to accept only those calls from a special list of people. When your service it turned on, your phone will only accept only calls from those on your Selective Call Acceptance list. All other calls will hear an announcement that you're not accepting calls at this time.
How it works:
To Turn on the service:
1)Lift the handset and listen for dial tone.
2)Press *64
3)LIsten for an announcement telling you whether the feature is currently turned on or off. The recorded voice will then tell you how many (if any) number are currently stored in your accpetance list.
4)Follow the voice instructions and dial 3 to turn the feature ON (if it is currently off), or turn the feature OFF (if it is currently on). To add the last caller to your acceptance list:
1)Press #01#
To hear the phone numbers on your list:
1)Dial 1. After the list is read, instructions will follow.
To add a phone number to your list
1)Press #. Follow the voice instructions you'll hear. You can store up to 31 phone numbers on you list.
To remove a number from your list:
1)Press *. Follow the voice instructions to remove any or all of those numbers. To hear instructions again: Dial 0.
Notes:
You may press 1,0,#, or * at anytime rather than waiting for the voice instructions.
The list you create here is seperate from any other lists you may be using for Distinctive Ringing, Selective Call Rejection, and similiar services.